Heath Zenith SL-5318 Manual de usuario descargar pdf (Pagina 1)

Model SL-5318

Dual Brite

™

Motion

Sensor Light

Control for

Canadian Tire

Light Control

Sensor

Cover

Plate

Lamp Holders

2 Wire Connectors

6 Screws

(3 sizes included)

Gasket

2 Shells

Features

• Turns on lighting when motion is detected.

• Automatically turns lighting off.

• Dual Brite™ Timer.

• Photocell keeps the lighting off during daylight hours.

• LED indicates motion was sensed (day or night).

Requirements

• The Light Control requires 120-volts AC.

• If you want to use the Manual Mode, the control must

be wired through a switch.

• Some codes require installation by a qualified

electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet

locations.

Mounting Bolt

Mounting Strap

Rubber Plug

Plastic Hanger

This package includes:

TEST

TEST 1520

ON-TIME

Off 36Dusk to

Dawn

DUAL BRITE™

Put ON-TIME switch on

the sensor bottom to

TEST and the Dual

Brite™ switch OFF.

Dual Brite™ TIMER

Light comes on half bright for selected time after dusk

(Off, 3 hr., 6 hr., until dawn). If motion is sensed, the light

turns on full bright for the ON-TIME (1,5, or 20 minutes)

then returns to dim mode.

Mode: On-Time: Works: Day Night

Test 5 Sec x x

Auto 1, 5, 20 min. x

Manual Until Dawn* x

OPERATION

* resets to Auto Mode at dawn.

MANUAL MODE

ON-TIME

TEST 1520

... back on.

AUTO

1 Second OFF

then...

Move ON-TIME Switch to

1, 5, or 20 minutes

Mode Switching Summary

Flip light switch off

for one second then

back on*

MANUAL MODE

AUTO

TEST

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the

calibration time the control will be in the AUTO mode.

Note: When first turned on wait about 1

minutes for

the circuitry to calibrate.

Manual mode only works at night

because daylight returns the sensor

to AUTO.

Flip the light switch off for one second

then back on to toggle between AUTO

and MANUAL MODE.

Manual mode works only with the ON-

TIME switch in the 1, 5, or 10 position.

Put the ON-TIME switch in the 1, 5, or

20 minute position.

1 2 3 4 5 6 ... 11 12

Indice de contenidos

Pagina 1 - Canadian Tire

Pagina 2

598-1001-0110INSTALLATIONPour faciliter l’installation, choisir un appareil d’éclairagedevant être remplacé et qui est déjà commandé par uninterrupteu

Pagina 3 - SPECIFICATIONS

598-1001-0111DétecteurMouvementMouvement21 m 30,5 m2,4 mBas du détecteurBOOSTMAXMINRANGEON - TIME DUAL BRITETEST 1 5 2 0MINUTESOFF 3 6 DUSK TOHO

Pagina 4 - TROUBLESHOOTING GUIDE

598-1001-0112Pour informations sur la garantie, consulter votre détaillant Canadian Tire.GUIDE DE DÉPANNAGESi vous éprouvez des difficultés, suivre ce

Pagina 5 - Dual Brite™ para

598-1001-012INSTALLATIONFor easy installation, select an existing light with a wallswitch for replacement.For eave mount only:❒ Swing the sensor head

Pagina 6 - INSTALACION

598-1001-013MotionMotion8 ft.(2.4 m)70 ft. 100 ft.(21 m) (30.5 m)BoostedSensor240°BOOSTMAXMINRANGEON - TIME DUAL BRITETEST 1 5 2 0MINUTESOFF 3 6

Pagina 7 - ESPECIFICACIONES

598-1001-014See your Canadian Tire retailer for warranty information.SYMPTOMLights will not comeon.Lights come onin daylight.Lights come on forno appa

Pagina 8 - 598-1001-01

Pagina 9 - à détecteur

598-1001-016CONECTE EL CONTROL DE LUZ.INSTALACIONPara una fácil instalación escoja una luz con uninterruptor de pared.Sólo para montaje eléctrico:❒ Gi

Pagina 10 - INSTALLATION

598-1001-017DetectorMovimientoMovimiento2.4 m30.5 m(Aumento deDistancia)21 mBOOSTMAXMINRANGEON - TIME DUAL BRITETEST 1 5 2 0MINUTESOFF 3 6 DUSK

Pagina 11 - Portée maximale Angle de

598-1001-018Para información sobre garantía vea a su minorista de Canadian Tire.GUIA DE INVESTIGACION DE AVERIASSi tiene algún problema siga esta guía

Pagina 12 - GUIDE DE DÉPANNAGE

598-1001-019Caractéristiques• Allume l’éclairage lorsqu’un mouvement est détecté.• Éteint automatiquement l’éclairage.• Minuterie de Dual Brite™.• Pho